THE BOEING COMPANY |
|
In compliance Boeing specification |
|
Approval Number: 560892 (Boeing Tooling 53544-001) |
|
Specification or Code: |
Description: |
DPS 11.01 |
Chromic Acid Anodize |
DPS 11.01-3 |
Chromic Acid Anodize - Chromate Sealed |
DPS 11.04 |
Hardcoat Sulfuric Acid Anodizing Type 3 |
DPS 11.05 |
Sulfuric Acid Anodizing |
DPS 11.05-1 |
Sulfuric Acid Anodizing - Controlled Thickness |
DPS 11.05-2 |
Sulfuric Acid Anodize (Thin Film) |
NOTE- Type IIB Thin is no longer allowed per DPS 11.05-1 it is to be applied per DPS 11.05-2 |
|
DPS 4.50-127 |
Fuel Tank Coating |
DPS 4.704 |
Magnetic Particle Inspection |
DPS 4.707 |
Penetrant Inspection |
DPS 4.715 |
Etch Inspection |
DPS 9.45 |
Colorless & Multicolored Conversion Coating, (TYI - Immersion Application Only) |
EPB 4-230 |
Prime & Paint |
EPB 4-232 |
Prime & Paint |
HP 4-2 |
Anodizing - Aluminum (Type I, Class 1) |
HP 4-57 |
Chemical Film - Aluminum (Immersion Application Only) |
HP 6-5 |
Magnetic Particle Inspection |
HP 6-13 |
Penetrant Inspection - Fluorescent |
PS 13201 |
Anodizing Aluminum - Sulfuric Acid (TYII & TYIIA) Anodize |
PS 13202 |
Colorless Conversion Coat, (Immersion Application Only) |
PS 13208 |
Hard Anodizing-Aluminum |
PS 13209 |
Multi-colored Conversion Coating of Aluminum by Immersion |
PS 15063 |
HT Steel - Stress & Embrittlement Relief (Below 1150oF) |
PS 18021 |
Application of Dry Film Lubricant |
PS 21201 |
Magnetic Particle Inspection |
NOTE: Exclude parts with internal surfaces that require special inspection equipment |
|
PS 21202A |
Penetrant Inspection - Aluminum |
PS 21202B |
Penetrant Inspection - Beryllium |
PS 21202C |
Penetrant Inspection - Cobalt & Nickel |
PS 21202D |
Penetrant Inspection - Copper |
PS 21202E |
Penetrant Inspection - Low Alloy Steels |
PS 21202H |
Penetrant Inspection - Stainless Steels |
PS 21202J |
Penetrant Inspection - Titanium |
PS 21205 |
Temper Etch Inspection |
D 14426 |
Quality System |
MIL-A-8625 |
Chromic Acid Anodizing of Aluminum - TYI, TYII, & TYIII |
MIL-DTL-5541 |
Chemical Conversion Coat, Immersion Only |
BAC 5423 |
Penetrant Inspection |
BAC 5632 |
Boric Acid - Sulfuric Acid Anodizing,Class 1 and 5 |
BAC 5665(Manual) |
Sol-Gel Coating - Type I (Abrasive Clean) Method 1 (Spray) and Method 2 application and Type III (Chemical Clean) pretreatment with Method 1 (Spray) |
BAC 5821 |
Hard Anodizing - Class 1 and 2 |
BAC 5719 |
Chemical Conversion Coating,Immersion Application Only (TY I, CL A,B,D) |
BAC 5861 |
Phosphate Fluoride Coatings - Titanium |
BAC 5884 |
Boric/Sulfuric Acid Anodize Type IC |
BAC 5751 |
Passivation of Stainless Steel Type 2, Class 2(approval not req'd) |
BAC 5753 |
Cleaning - Descaling Titanium,Method II Only |
BAC 5793 |
Finish for Integral Fuel Tank |
BAC 5625 |
Passivation of CRES Method 2(approval not req'd) |
BAC 5424 |
Magnetic Particle Inspection |
BSS 7039 |
Liquid Penetrant Inspection |
BSS 7040 |
Magnetic Particle Inspection |
ASTM-E-1417 |
Penetrant Inspection |
(MIL-I-6866) |
Penetrant Inspection |
ASTM-E-1444 |
Magnetic Particle Inspection |
MIL-STD-1949 |
Magnetic Particle Inspection |
(MIL-I-6868) |
Magnetic Particle InspectionClass 1 and 2 |
Chemical Testing |
Process Solution Control (Internal Support Only) |
NAS 410 |
Non destructive Testing - Level 3 Magnetic Particle Inspection |
NAS 410 |
Non destructive Testing - Level 3 Penetrant Inspection |
5PTPBH26A |
Sol-Gel Application for Titanium |